0.7 Ω 300 WATT 12 VOLT WIND GENERATOR & SOLAR RESISTOR DIVERSION DUMP LOAD RED

Description

0.7 Ω 300 WATT 12 VOLT WIND GENERATOR & SOLAR RESISTOR DIVERSION DUMP LOAD RED
0.7 Ω 300 WATT WIND  GENERATOR & SOLAR RESISTOR DIVERSION DUMP LOAD 12V
NEW HEAVIER WOUND RED RESISTOR
See other listings for 24 and 48 volt
Designed Specifically for Hurricane Wind Power the new Red Heavy Duty Wire Wound Resistor  is designed for dumping excess energy from 12 volt renewable energy systems. The diversion load resistor is used in conjunction with a charge controller to regulate DC Power systems. These resistors can be wired in parallel to increase the wattage that may be dumped in a particular voltage bank. While not needed as can be seen in photo number 3 these resistors have vent holes in both ends which with the use of fan forced air can be configured into a heater. These resistors become very hot and in no circumstances should be mounted to wood. See our other auctions for Diversion load charge controller such as the Xantrex C 35, 40 and 60 as well a Flexcharge models for quality diversion load controllers
Item Dimension: 12.5 L x 2 W x 3.5 H inches
Item
weight: 1.5 pounds
FREE! Sellers: Add a FREE map to your listings. FREE!
Froo www.froo.com | Froo Cross Sell, Free Cross Sell, Cross promote, eBay Marketing, eBay listing Apps, eBay Apps, eBay Application
Hurricane Wind Power
2019
Corporate America Today
2019 Best Off-Grid
Renewable Energy
Product Supplier - USA
UP TO 50% DISCOUNTS
TOP BRANDS
Payment
Shipping
Returns
Payment
Shipping
Returns
We accept payment by any of the following methods:
PayPal
Please pay as soon as possible after winning an auction, as that will allow us to post your item to you sooner!
We offer
Fast shipping
on all orders!
Your order will be dispatched within 1-3 working day of receiving payment (Monday-Friday) and you should expect to receive it one or two days after dispatch (for orders sent RM 1st Class).
In the very unlikely event that your item is lost or damaged during post, then WE are responsible and will issue either a full refund or replacement.
If you are not 100% satisfied with your purchase, you can return the product and get a full refund or exchange the product for another one, be it similar or not.
You can return a product for up to 14 days from the date you purchased it.
Any product you return must be in the same condition you received it and in the original packaging. Please keep the receipt.
See our other items
Thank you for visiting our Ebay store!
0.7 Ω 300 WATT WIND GENERATOR & SOLAR RESISTOR DIVERSION DUMP LOAD 12V NEW HEAVIER WOUND RED RESISTOR See other listings for 24 and 48 volt Designed Specifically for Hurricane Wind Power the new Red Heavy Duty Wire Wound Resistor is designed for dumping excess energy from 12 volt renewable energy systems. The diversion load resistor is used in conjunction with a charge controller to regulate DC Power systems. These resistors can be wired in parallel to increase the wattage that may be dumped in a particular voltage bank. While not needed as can be seen in photo number 3 these resistors have vent holes in both ends which with the use of fan forced air can be configured into a heater. These resistors become very hot and in no circumstances should be mounted to wood. See our other auctions for Diversion load charge controller such as the Xantrex C 35, 40 and 60 as well a Flexcharge models for quality diversion load controllers Item Dimension: 12.5 L x 2 W x 3.5 H inches Item weight: 1.5 pounds [FREE! Sellers: Add a FREE map to your listings. FREE!] (http://newage.mystoremaps.com/echo/tagLine?sid=cea073c8-fc6f-494f-9ca5-610e8850a127&tid=1) Froo www.froo.com | Froo Cross Sell, Free Cross Sell, Cross promote, eBay Marketing, eBay listing Apps, eBay Apps, eBay Application
0.7 Ω 300 WATT 12 VOLT WIND GENERATOR & SOLAR RESISTOR DIVERSION DUMP LOAD RED
0.7 Ω 300 WATT WIND  GENERATOR & SOLAR RESISTOR DIVERSION DUMP LOAD 12V
NEW HEAVIER WOUND RED RESISTOR
See other listings for 24 and 48 volt
Designed Specifically for Hurricane Wind Power the new Red Heavy Duty Wire Wound Resistor  is designed for dumping excess energy from 12 volt renewable energy systems. The diversion load resistor is used in conjunction with a charge controller to regulate DC Power systems. These resistors can be wired in parallel to increase the wattage that may be dumped in a particular voltage bank. While not needed as can be seen in photo number 3 these resistors have vent holes in both ends which with the use of fan forced air can be configured into a heater. These resistors become very hot and in no circumstances should be mounted to wood. See our other auctions for Diversion load charge controller such as the Xantrex C 35, 40 and 60 as well a Flexcharge models for quality diversion load controllers
Item Dimension: 12.5 L x 2 W x 3.5 H inches
Item
weight: 1.5 pounds
FREE! Sellers: Add a FREE map to your listings. FREE!
Froo www.froo.com | Froo Cross Sell, Free Cross Sell, Cross promote, eBay Marketing, eBay listing Apps, eBay Apps, eBay Application
Hurricane Wind Power
2019
Corporate America Today
2019 Best Off-Grid
Renewable Energy
Product Supplier - USA
UP TO 50% DISCOUNTS
TOP BRANDS
See our other items
Payment
We accept payment by any of the following methods:
PayPal
Please pay as soon as possible after winning an auction, as that will allow us to post your item to you sooner!
Shipping
We offer
Fast shipping
on all orders!
Your order will be dispatched within 1-3 working day of receiving payment (Monday-Friday) and you should expect to receive it one or two days after dispatch (for orders sent RM 1st Class).
In the very unlikely event that your item is lost or damaged during post, then WE are responsible and will issue either a full refund or replacement.
Returns
If you are not 100% satisfied with your purchase, you can return the product and get a full refund or exchange the product for another one, be it similar or not.
You can return a product for up to 14 days from the date you purchased it.
Any product you return must be in the same condition you received it and in the original packaging. Please keep the receipt.
Thank you for visiting our Ebay store!
0.7 Ω 300 WATT WIND  GENERATOR & SOLAR RESISTOR DIVERSION DUMP LOAD 12V
NEW HEAVIER WOUND RED RESISTOR
See other listings for 24 and 48 volt
Designed Specifically for Hurricane Wind Power the new Red Heavy Duty Wire Wound Resistor  is designed for dumping excess energy from 12 volt renewable energy systems. The diversion load resistor is used in conjunction with a charge controller to regulate DC Power systems. These resistors can be wired in parallel to increase the wattage that may be dumped in a particular voltage bank. While not needed as can be seen in photo number 3 these resistors have vent holes in both ends which with the use of fan forced air can be configured into a heater. These resistors become very hot and in no circumstances should be mounted to wood. See our other auctions for Diversion load charge controller such as the Xantrex C 35, 40 and 60 as well a Flexcharge models for quality diversion load controllers
Item Dimension: 12.5 L x 2 W x 3.5 H inches
Item
weight: 1.5 pounds
FREE! Sellers: Add a FREE map to your listings. FREE!
Froo www.froo.com | Froo Cross Sell, Free Cross Sell, Cross promote, eBay Marketing, eBay listing Apps, eBay Apps, eBay Application